The E300 device inherits ESTUN classic mode of operation, through a simple and intuitive parameter configuration interface to complete the bending machine control operation. Its friendly interface, easy to use, practical function, and has the following features:

• 4 axes are supported, viz, X-axis, Y-axis, R-axis and Crowing axis.
• Automatic calculation of the block position, according to the bending angle, material, thickness and mold parameters.
• The back gauge can be controlled with high accuracy since the servo systems control X-axis and R-axis.
• Optional hydraulic or mechanical to control the C-axis.
• Program in absolute value or angle.
• You can backup, restore, import and export the parameters, for commissioning the machine easily.
• Edit the program in one page, for improving the operating efficiency.
• You can program the dwell time (holding time) and retracting delay by the device instead of the time relay.
• Interference or collision of the die can be avoided.
• The opening distance can be adjusted, for improving the operating efficiency.
• Automatically adjust the clamping point position.
• You can view the status of inputs, outputs, valves and faults on the Monitor page at any time.
• Automatically adjust the zero position of the R-axis.
• Materials and die information are programable.
• Three of operation modes (Jog, Single, Continuous) for the jobs.
• Language setting and unit setting.
• IO ports can be allocated freely, and the device can detect them to avoid a repeat.
• Bilateral positioning and unilateral positioning.
• Slug clearance function.
• Teaching or search the reference point.
• The Axis, which is controlled by a servo system, can be manually moved.
• Real-time memory the parameters, positions and programs against unexpected accidents such as interruption of power supply.

The DA-41 control provides a complete solution for conventional press brake applications for 2 axes. Including the axes control for the press beam and backgauge and flexible I/O configuration, the state-of-the-art electronics offers a versatile solution.

With its bright LCD display a clear and easy control is offered. The numerical programming, having an angle, tool and material parameters on hand, can be done in a direct table overview. The bend parameters can be selected via user-friendly cursor manipulation.

The axes control supports servo control, two-speed AC control as well as unipolar control. Depending on the application you can select either two-side positioning as well as single-side positioning with spindle fault elimination.

Features:

• Bright LCD display
• Beam stop control
• Backgauge control
• Angle programming
• Tool programming
• Retract function
• Up to 100 programs
• Up to 25 bends per program

• Quick, one page programming
• Hotkey navigation
• 7” VGA colour TFT
• Up to 4 axes (Y1, Y2, and 2 auxiliary axes)
• Crowning control
• Tool/material/product library
• USB, peripheral interfacing
• Advanced Y-axis control algorithms for closed-loop as well as open-loop valves

The compact DA-52s is a complete CNC solution for conventional as well as synchronized press brakes.

The panel-based control, capable of controlling up to 4 axes, can be integrated with cabinets as well as in an optional pendulant arm housing.

Equipped with the Delem user-friendly user interface, the DA-52s provides all main press brake functionality.

The unique ‘hotkey’ navigation gives direct access to the programs in memory and enables quick and easy programming of a product. All common bend parameters are located on one page. For advanced parameters, an additional page can be selected.

Angle programming of the Y-axis, crowning function and pressure control are standard on board.

USB interfacing enables the use of memory sticks as a fast product and tool backup medium.

• “Hot-key” touch navigation
• 10.1″ high resolution colour TFT
• Up to 4 axes (Y1,Y2 + 2 aux. axes)
• Crowning control
• Tool / material / product library
• Servo and frequency inverter control
• Advanced Y-axis control algorithms for closed-loop as well as open-loop valves.
• TandemLink (option)
• USB memory stick interfacing
• Profile-T offline software

The new compact DA-53T adds a state-of-the-art complete touch control solution for synchronized press brakes. Offering easiest CNC programming based on the Delem graphical touch screen user interface.

This panel-based control, standard capable of controlling up to 4 axes, can be integrated with cabinets as well as used in an optional pendulant arm housing. Its 10.1″ widescreen high-resolution colour TFT, with industrial-grade multi touch technology, gives access to the proven Delem user interface. It enables direct “hot-key” touch navigation between product programming and actual production. Functions are located where needed, offering optimized ergonomics throughout the entire application.

Machine adjustment and test bends are reduced to a minimum with a quick and easy program-to-production work sequence.

• 2D graphical touch screen programming
• 15″ high-resolution colour TFT
• Bend sequence calculation
• Crowning control
• Servo and frequency inverter control
• Advanced Y-axis control algorithms for closed-loop as well as open-loop valves
• USB, peripheral interfacing
• Profile-T offline software

The DA-58T is a state of the art complete 2D graphical control solution for synchronized press brakes. Offering easiest CNC programming based on the Delem graphical touch screen user interface including automatic bend sequence calculation and collision detection.

Its 15″ high-resolution color TFT, with industrial-grade multi-touch screen technology, gives access to the proven Delem user interface. It enables direct navigation between product programming and actual production.
Functions are directly located where needed, offering optimized ergonomics throughout the entire application.

Machine adjustment and test bends are reduced to a minimum with a quick and easy program-to-production work sequence. CNC programs are generated with a single touch. You are immediately ready to make the first part since all axes positions are automatically computed and the bend sequence has been simulated with machines and tools on a real scale.

The production mode of the DA-58T helps the operator in graphically simulating the bending process of the product, guiding him during the press brake operation.

• 3D and 2D graphical touch screen programming mode
• 3D visualisation in simulation and production
• 17″ high-resolution colour TFT
• Full Windows application suite
• Delem Modusys compatibility (module scalability and adaptivity)
• USB, peripheral interfacing
• User-specific application support within the control’s multitasking environment
• Sensor bending & correction interface
• Profile-T3D offline software

The DA-66T offers 2D programming that includes automatic bend sequence calculation and collision detection. Full 3D machine set-up with multiple tool stations giving true feedback on the product feasibility and handling.

• 3D and 2D graphical touch screen programming mode
• 3D visualisation in simulation and production
• 17″ high-resolution colour TFT
• Full Windows application suite
• Delem Modusys compatibility (module scalability and adaptivity)
• USB, peripheral interfacing
• User-specific application support within the control’s multitasking environment
• Sensor bending & correction interface
• Profile-T3D offline software

The DA-69T offers 2D as well as 3D programming that includes automatic bend sequence calculation and collision detection. Full 3D machine set-up with multiple tool stations giving true feedback on the product feasibility and handling.

Easy Operating

• Large, vivid and high-contrast fully touch screen.
• Simple pages, clear display, large keys.
• Very simple single bends with
• EasyBend page.
• Complete programming allows efficient mass-production of parts with multiple bends.
• Online help and warning pop-ups make it a very user-friendly software.
• Available in many languages.
• Comfortable wireless software updating and data backup using PC or Notebook.

Better Bending

• Various automatic calculations of bend functions according to materials.
• Bending sequences and programs can be memorized.
• Angle, pressure and crowning management.

Powerful

• Bend allowance calculation.
• Pressure–crowning calculation (P version only).
• Modular tools for each part or bend.
• Punch depth calculation.
• Angle and back gauge correction.

Customer Benefits

• Open to any operator through simple and intuitive full touch screen programming
• Quality and productivity increases
• Powerful features for easy operating and better bending

CybTouch 8P is specifically designed for conventional (with torsion bar) 2-axes press brakes control
It has an intuitive and vivid color full touch screen and a high integration of functions. Its robust design is available in panel or housing versions.
Thanks to its large keys, online help, simplified software and many other automatic functions that constantly guide the operator, CybTouch is as simple as a positioner control.

CybTouchTools
All CybTouch come with CybTouchTools, which allows to wirelessly transfer data between a PC and CybTouch (requires optional RFLink USB key). It is used to backup/restore machine parameters, tools and parts, as well as updating the firmware.

Easy Operating

• Large, vivid and high-contrast fully touchscreen.
• Simple pages, clear display, large keys.
• Intuitive user-friendly interface.
• Complete programming for efficient mass production with multiple bends.
• Easy single bends with EasyBend page.
• On-line help and interactive warning pop-ups.
• Comfortable wireless data backup and software updating using PC or Notebook.
• Large variety of languages is available.

Better Bending

• Various automatic calculations of bend functions.
• Bending sequences and programs can be memorized.
• Angle, pressure and crowning management.
• Easy manual movement.
• Offline 2D software available.

Powerful

• Bend allowance calculation.
• Pressure–crowning calculation (P version only).
• Modular tools for each part or bend.
• Punch depth calculation.
• Angle and back gauge correction.

Customer Benefits

• Open to any operator thanks to the simple and intuitive full touch screen programming
• Modern and efficient hand drawing part profile programming
• Very fast solution provided by 2D graphic display and automatic bending sequence

CybTouch 12 PS is specifically developed for synchronized press-brakes.
As part of the CybTouch range, it has an intuitive and vivid color touch screen and a high integration of functions. With its interactive touch software interface with large keys, its 2D graphic display, on-line help, and many other automatic functions that constantly guide the operator, CybTouch 12 is very easy to operate. CybTouch 12 comes with a robust, modern and streamlined housing specially designed to be mounted on an arm.
CybTouchTools
All CybTouch come with CybTouchTools, which allows to wirelessly transferring data between a PC and CybTouch (requires optional RFLink USB key). It is used to backup/restore machine parameters, tools and parts, as well as updating the firmware.
PC Offline Software
We supply the same universal PC offline software for all CybTouch, VisiPac and VisiTouch controls.
OFT-VST-2 PC offline software VisiTouch (2D)
OFT-VST-MX PC offline software VisiTouch MX (3D)
OFT-VST-MXIMP PC offline software VisiTouch MX including import of DXF/DWG, IGES, STEP, SAT and X_T
All three above PC offline software allow transferring tools and programs to CybTouch 8PS, 12S, 15S, VisiPac and VisiTouch controls.
PC offline software VisiTouch now offers the possibility to program parts for several press brakes (multi-machines functionality).

• 19” modern streamlined glass surface touch screen that can be used with gloves.
• User-friendly HMI, similar to the CybTouch’s one, thanks to intuitive programming and dedicated set-up wizards (auto-tuning).
• Full 3D visualization and simulation.
• Parts management with DXF flat pattern and 3D format files import.
• Automatic solutions of complex parts, automatic bend sequencing, gauging, tooling and auto segmentation.
• Running under Windows 10 for multi-tasking and networking
• Internal backup and restore functions.
• Outstanding diagnostic tools.

The VisiTouch 19 MX is a 3D graphical numerical control for CNC press brakes. It aims at making the operator’s work easier even for demanding programming and setting-up tasks. For instance, CAD parts can directly and easily be imported into the VisiTouch MX control or into the MX offline software.

The elegant and recognizable design and interface let the operator exploit the full range of features with his fingertips. Importing programming, visualizing and simulating the bending of a part, all in 3D on the large 19” screen become quick, easy and efficient. Behind the stage, the VisiTouch MX is a powerful numerical control that can be adapted to standard press-brakes up to the most sophisticated models controlling any number of axes.

With its capacity to manage complex features such as bending aids or slaves axes combined with a wide range of parameters allowing complete use of the press brake performances and set up wizard, the VisiTouch 19 MX will give the press brake the decisive competitive edge.