• Bright LCD display
• Beam stop control
• Backgauge control
• Angle programming
• Tool programming
• Retract function
• Up to 100 programs
•  Up to 25 bends per program

PB Series CNC press brake is a 2 axis CNC hydraulic bender machine, which provides a user-friendly and versatile touch control solution for conventional press brake applications with multiple axes. Upon demand, it is possible to control the press beam, the backgauge as well as a flexible i/o configuration, based on state of the art electronics.
Bending Capacity: 40t – 300t
Bending Width:2500mm – 6000mm

Classic cnc control system DA41S is improved again to control machine tool with torsion shaft perfectly together with servo motor. Advanced functions of angle programming, pressure calculation and built-in logic improve the overall competitiveness of the machine tool. Outstanding product quality erases the worries in the future.

Generally, the press brake machine including four main parts:

• Mechanical parts
• Electrical parts.
• Hydraulic part.
• NC/CNC controller

The DA-41 control provides a complete solution for conventional press brake applications for 2 axes. Including the axes control for the press beam and backgauge and flexible I/O configuration, the state-of-the-art electronics offers a versatile solution.

With its bright LCD display, clear and easy control is offered. The numerical programming, having an angle, tool and material parameters on hand, can be done in a direct table overview. The bend parameters can be selected via user-friendly cursor manipulation.
The axes control supports servo control, two-speed AC control as well as unipolar control. Depending on the application you can select either two-side positioning as well as single-side positioning with spindle fault elimination.

From the German brand Siemens motors improve the life of the sheet metal bending machine, and the press brake machine operates in a low noise environment.

The oil pump adopts a (USA SUNNY) gear pump, which can withstand high pressure and low noise.

lt is recommended to use antiwear hydraulic oil ISO VG46#(the average value of viscosity is 46mm2/s).

Hydraulic system (Bosch Rexroth) slider can achieve rapid decline, slow down the speed of bending work, and quick return upward, downward and the like during the operation stop of the slider.

The quick clamps have the advantages of high precision, reasonable structure, stable clamping.  We greatly shorten the time of press brake upper punch adjustment.

The toolings (punch and die) of the press brake machine are made from Alloy material(42CrMo), and the hardness can reach 42 degrees to ensure the service life of the molds.

The power supply of the CNC bending machine adopts a three-phase AC 50HZ380V power supply. After the AC voltage is output from the internal transformer of the system, it can be directly used for the operation of the main motor, and can also be used for the rear gear servo and equipment lighting. The other group forms two groups of DC 24V after rectification, one group is used by CNC controller, and the other group is used by control loop.

Once the worker opens the electric cabinet door, the machine will stop immediately.

The sheets can be held on the support to ensure that they are pushed one at a time, which is more convenient for bending work.

The sealing ring is selected from NOK, which has good sealing performance, reliable work and long life.

The backgauge is positioned by a precision ball screw and supported by a high-precision linear guide

The upper and lower adjustable fine-tuning fingers with higher precision are adopted, and the double linear guide rails on the beam move left and right to ensure the accuracy of the fingers moving to any part in the left and right directions.

The backgauge use a servo-motor to drive a ball screw or belt drive to exert force on the ram to make it move vertically.

The oil pipeline adopts a combination of compression fittings and galvanized cold-drawn pipes, eliminating the need to replace the sealing ring to overcome oil leakage.

Q: There are so many machine types, which one should I choose?

A: Please communicate with us via inquiry or email, we can guide you.

Q: This is my first time buying your machine; I have no ideas about your machine’s quality?

A: Each machine is strictly produced based on standard certifications. We are confident to tell customers that there is no need to worry about our quality. Welcome you visit our factory anytime

Q: When I got this machine, but I don’t know how to use it. What should I do?

A: There are video and English manuals with the machine. If you still have any doubts, we can talk by telephone. we supply 24 hours online service.

Q: If some problems happen to this machine during the warranty period, what should I do?

A: We will supply free parts during the machine warranty period if the machine has some problems. While we also supply free life long after-sales service.

Q: Machine delivery time?

A: Within 20-30 working days after get your payment.