The bending machine must be maintained during use. In fact, no matter what machine it is, maintenance is necessary. After all, there will be loss during the use of the machine, and the loss of long-term non-maintenance will become more and more serious, so that the use effect of the machine will become worse, and it may even be prone to failure. Therefore, taking time to maintain is not a hassle, but to ensure the efficient operation of the equipment. So, how to do the maintenance of the bending machine?
1. The maintenance of the bending machine is not difficult. Check the key parts of the equipment before use, such as the lubrication part to see if it is lubricated, if not, do it as required. Look at whether the safety protection device is abnormal, whether the circuit and grounding are normal. Whether the fasteners are loose and so on.
2. During use, observe whether the equipment is operating abnormally, such as unusual noise or vibration. These are all things to pay attention to. If there is any abnormality, shut down the machine.
3. After using the equipment, cut off the power supply, and return the components as required. Clean the equipment.
The above are all very basic maintenance work for the bending machine. Only by doing as required can the equipment be kept in the best condition for a long time, so that it can perform better. If the equipment has a problem, it must be repaired. Note that you must find a professional maintenance worker to check and repair, and do not tamper with the equipment without authorization.adidas herren terrex fast r gtx trekking amp nike af1 low 07 Switzerland saltar la cuerda es cardio Chile adidas gazelle pernille teisbæk מידות תנור אמבטיה salvatore ferragamo black Chile kosz mojżesza pościel Amazon nike flex 2013 run black air force 1 schwarzes nike zeichen damen Switzerland juegos para nena de 5 años procesor d pentium nebo 4 pentium nike sb janoski free nike sportswear damen air force 1 07 next nature Switzerland saltar la cuerda es cardio Chile nike flex 2013 run black